Fascia boards are the vertical finishing edge that connects your roof to the outer walls of your home. They sit right behind your gutters, and they serve a critical dual purpose: providing a mounting surface for the gutter system and sealing the gap between the roof edge and the wall to keep water, pests, and debris out of your attic and roof structure.
In Florida, fascia boards take a beating. Constant humidity, heavy rainfall, intense UV exposure, and the occasional hurricane create conditions that can destroy unprotected wood in a decade or less. If you live in Pinellas County and your fascia is showing signs of rot, peeling paint, or structural weakness, replacing it before the damage spreads is one of the smartest investments you can make.
This guide covers fascia board replacement costs for 2026, including a detailed comparison of materials, labor pricing, and the specific considerations that affect Pinellas County homeowners.
Fascia Board Replacement Cost Overview (2026)
The total cost of fascia board replacement depends on the material, the amount of linear footage, and whether additional repairs to the underlying structure are needed. Here is what Florida homeowners are paying in 2026:
- Budget range: $1,200 to $2,200 (wood fascia, partial replacement)
- Mid range: $2,000 to $3,500 (composite or aluminum wrap, full replacement)
- Premium range: $3,000 to $5,000+ (PVC fascia, full replacement with structural repairs)
A typical Pinellas County home has 150 to 250 linear feet of fascia board. Ranch-style homes with simple rooflines fall toward the lower end, while homes with complex rooflines, multiple eaves, and varied elevations have more fascia footage and higher costs.
Fascia Board Material Cost Comparison
Your choice of material affects both the upfront cost and the long-term maintenance requirements. In Florida's climate, material selection matters more than in most other states because of the constant moisture and humidity exposure.
| Material | Cost Per Linear Foot (Installed) | Lifespan in FL | Maintenance Level |
|---|---|---|---|
| Wood (Pine/Cedar) | $8 to $15 | 15 to 20 years | High (paint every 3 to 5 years) |
| Composite | $12 to $20 | 25 to 40 years | Low (occasional cleaning) |
| Aluminum Wrap | $10 to $18 | 20 to 30 years | Very Low |
| PVC (Cellular) | $15 to $25 | 30 to 50 years | Very Low |
Wood Fascia: $8 to $15 Per Linear Foot
Wood remains the most common fascia material because it is affordable, widely available, and easy to work with. Pine is the standard choice for most builders, with cedar and redwood available as premium options that offer natural rot resistance.
The challenge with wood fascia in Florida is moisture. Pinellas County's average relative humidity hovers between 70% and 80% year-round, and summer afternoons frequently push past 90%. Wood that is constantly exposed to this level of moisture absorbs water, swells, and eventually rots. Even pressure-treated or primed wood requires regular painting (every 3 to 5 years) to maintain its protective barrier.
Wood fascia installed today with proper priming, painting, and caulking can last 15 to 20 years in Pinellas County. Without regular paint maintenance, that lifespan drops to 8 to 12 years. If you choose wood and want it to last, commit to the repainting schedule.
For a typical home with 200 linear feet of fascia, wood replacement runs $1,600 to $3,000 installed.
Composite Fascia: $12 to $20 Per Linear Foot
Composite fascia boards are made from a blend of wood fibers and synthetic resins that resist moisture penetration far better than solid wood. Brands like LP SmartSide and James Hardie (fiber cement) are popular in the Florida market. These products come pre-primed or pre-finished, look very similar to painted wood, and do not absorb water the way natural wood does.
Composite fascia is an excellent middle-ground option for Pinellas County homeowners. It costs moderately more than wood but lasts significantly longer (25 to 40 years) with minimal maintenance. Most composite fascia needs only occasional cleaning with a pressure washer on a low setting or a simple soap and water rinse.
The primary downside is weight. Fiber cement fascia, in particular, is significantly heavier than wood, which can make installation more challenging and time-consuming. This is reflected in the labor cost. For 200 linear feet, composite fascia replacement runs $2,400 to $4,000 installed.
Aluminum Wrap: $10 to $18 Per Linear Foot
Aluminum fascia wrap (also called aluminum fascia capping) involves covering existing fascia boards with pre-formed aluminum trim. This is not a replacement in the traditional sense but rather a protective cladding that shields the underlying wood from the elements.
Aluminum wrap is extremely popular in Florida because it provides excellent weather protection, comes in a wide range of colors (so no painting is needed), and installs relatively quickly. The aluminum is bent and formed on-site to match your specific fascia dimensions, creating a clean, custom-fit appearance.
The catch: aluminum wrapping only works if the underlying wood fascia is still structurally sound. If the wood is rotted, wrapping over it just hides the problem and allows it to continue spreading behind the aluminum. A reputable installer will inspect the wood underneath and replace any damaged sections before wrapping.
For 200 linear feet, aluminum fascia wrapping runs $2,000 to $3,600. If sections of the underlying wood need replacement first, add $8 to $15 per linear foot for those areas.
PVC Fascia: $15 to $25 Per Linear Foot
PVC cellular fascia boards are the premium option and the most durable choice for Florida homes. Made from expanded polyvinyl chloride, these boards are completely impervious to moisture. They will not rot, warp, crack from moisture absorption, or attract termites or carpenter ants. PVC fascia can be cut, nailed, and painted just like wood, but it will outlast wood by decades.
Brands like AZEK and Royal Building Products are the most commonly specified PVC fascia products in the Pinellas County market. They come in white and can be painted any color using exterior acrylic latex paint. The material has a smooth finish that holds paint well, and many homeowners find that the white finish matches their trim and soffits without needing paint at all.
PVC fascia is particularly well-suited for waterfront homes in areas like Clearwater Beach, Treasure Island, and Indian Rocks Beach, where salt spray adds another layer of moisture stress on top of Florida's already demanding climate.
For 200 linear feet, PVC fascia replacement runs $3,000 to $5,000 installed. While the upfront cost is the highest of any option, the 30 to 50 year lifespan and near-zero maintenance make it the best long-term value for Florida homeowners.
Signs Your Fascia Boards Need Replacement
Fascia damage often starts slowly and goes unnoticed because the boards sit behind the gutter system, making them hard to see from the ground. Here are the warning signs to watch for:
Visual Warning Signs
- Peeling, bubbling, or flaking paint: This is usually the first sign of moisture penetration. Paint peels when water gets behind it and pushes it off the surface. In Pinellas County, this is the most common early sign of fascia trouble.
- Discoloration or staining: Dark spots, streaks, or uneven coloring suggest water is sitting on or behind the fascia rather than draining away.
- Visible rot or decay: Soft spots, crumbling edges, or sections that are visibly deteriorating need immediate attention.
- Gutters pulling away: When gutters sag or pull away from the roofline, the fascia they are mounted to has likely weakened from rot.
- Small holes or evidence of pests: Woodpeckers, carpenter bees, squirrels, and other animals target softened wood. Small holes in fascia boards are often a sign that rot has already set in.
Physical Inspection
The best way to check fascia condition is with a simple poke test. Using a screwdriver or awl, press firmly into the fascia board at several points along its length. Healthy wood feels solid and resists penetration. If the tool sinks in easily, the wood has rotted and needs replacement. Pay special attention to:
- Areas directly behind gutter seams where water may have been leaking
- Corners and joints where two fascia boards meet
- Sections beneath valleys where water volume is highest
- The lowest fascia on each elevation (water runs downhill)
Repair vs. Replace: When Can You Save Money?
Not every fascia problem requires full replacement. Targeted repairs can extend the life of your fascia system at a fraction of the cost.
When Repair Works
- Isolated damage: One or two sections with localized rot while the rest is solid. Replace only the damaged sections for $200 to $500.
- Surface-only deterioration: Peeling paint without underlying rot. Sand, prime, and repaint for $3 to $6 per linear foot.
- Minor animal damage: Small holes from woodpeckers or carpenter bees can be filled with exterior wood filler, sanded, and painted for under $100.
- Gutter-related issues: If fascia damage is limited to the area directly behind a leaking gutter joint, fixing the gutter and patching the fascia may be sufficient.
When Replacement is Necessary
- Widespread rot: If more than 25% to 30% of your fascia shows signs of rot, full replacement is more cost-effective than patching multiple sections.
- Structural compromise: If the fascia is no longer firmly attached to the rafter tails or sub-fascia behind it, the entire board needs to come off.
- Pest infestation: Termite damage to fascia often indicates deeper structural issues. Replace the fascia and have a pest control professional inspect the roof framing.
- During a roof or gutter replacement: If you are already getting a new roof or gutters, addressing fascia at the same time saves the separate labor cost of removing and reinstalling gutters.
Florida Humidity and Wood Rot: Why It Matters
Wood rot is the primary reason fascia boards fail in Pinellas County, and understanding how it works helps you make better material and maintenance decisions.
Wood rot is caused by fungi that break down the cellulose in wood. These fungi need three things to thrive: moisture, oxygen, and temperatures between 40 and 100 degrees. Florida provides all three in abundance, year-round. While northern homeowners may get a reprieve during winter when temperatures drop and fungi go dormant, Pinellas County fascia is under constant biological attack 365 days a year.
The most common rot-causing scenario is simple: a gutter system that leaks or overflows allows water to run behind the gutter and onto the top edge of the fascia board. This top edge is the most vulnerable because it is horizontal, allowing water to pool and absorb into the end grain of the wood. Once moisture gets into the wood, rot fungi colonize quickly. You may not see visible damage for a year or two, but the inside of the board is already compromised.
This is why proper gutter maintenance, including keeping gutters clean and ensuring all joints are sealed, is the single most effective way to extend fascia life. It is also why many Pinellas County homeowners are switching to rot-proof materials like PVC and composite for their fascia replacements.
Termites and Fascia
Florida is home to both subterranean and drywood termites, and both species are attracted to moisture-damaged wood. Rotting fascia becomes a termite magnet. Once termites establish a colony in the fascia, they can spread into the roof framing, soffit, and wall structure.
If you discover termite damage during fascia replacement, do not simply replace the fascia and move on. Have a licensed pest control company inspect the surrounding structure and treat as necessary. PVC and composite fascia materials are termite-proof, which adds another argument for choosing them in the Florida market.
Labor Costs and What to Expect
Labor typically accounts for 40% to 60% of the total fascia replacement cost. Here is what goes into the labor side of the project:
Typical Labor Breakdown
- Gutter removal and reinstallation: Gutters must come down before fascia can be replaced. If the gutters are in good condition, the contractor will carefully remove and reinstall them. If they are old or damaged, this is the time to consider gutter replacement.
- Old fascia removal: Prying off the old boards, removing nails, and cleaning up the rafter tails underneath.
- Sub-fascia inspection and repair: Behind the visible fascia board, many homes have a sub-fascia (typically 2x6 or 2x8 lumber) nailed to the rafter tails. If this sub-fascia is also rotted, it must be replaced before the new fascia goes on. This is a common and expensive surprise, adding $5 to $12 per linear foot.
- New fascia installation: Measuring, cutting, fitting, and fastening the new boards. Joints must be properly sealed, and end cuts treated or sealed against moisture.
- Finishing: Priming and painting (for wood) or touch-up work for factory-finished products.
Labor Cost Factors
- Story height: Single-story fascia replacement is straightforward ladder work. Two-story work requires taller equipment and more time, adding 25% to 40% to labor costs.
- Roof complexity: Homes with multiple rooflines, dormers, and varied eave heights take longer and cost more than simple rectangular footprints.
- Accessibility: If landscaping, fences, pools, or screen enclosures limit access to certain sides of the house, extra time and care are needed.
- Season: Roofing and exterior work in Pinellas County is busiest from October through May (dry season). Scheduling during summer months (rainy season) may offer lower prices but comes with more weather delays.
Fascia Replacement Cost by Home Size
Here is what full fascia replacement typically costs based on home size, using the most popular material choices in Pinellas County:
| Home Size | Est. Fascia Footage | Wood Cost | PVC Cost |
|---|---|---|---|
| 1,500 sq ft | 130 to 170 ft | $1,040 to $2,550 | $1,950 to $4,250 |
| 2,000 sq ft | 170 to 220 ft | $1,360 to $3,300 | $2,550 to $5,500 |
| 2,500 sq ft | 200 to 260 ft | $1,600 to $3,900 | $3,000 to $6,500 |
| 3,000 sq ft | 240 to 300 ft | $1,920 to $4,500 | $3,600 to $7,500 |
These estimates include labor, materials, gutter removal and reinstallation, and basic disposal. They do not include sub-fascia repair, which adds $5 to $12 per linear foot if needed, or painting for wood fascia, which adds $2 to $4 per linear foot.
Combining Fascia Work with Other Projects
Fascia replacement is most cost-effective when bundled with related exterior work. Here are the most common combinations and approximate savings:
- Fascia + gutter replacement: Save 10% to 15% on combined labor since gutter removal is already part of the fascia job
- Fascia + soffit replacement: Save 15% to 20% on labor because the same scaffolding and access setup serves both projects
- Fascia + roof replacement: Save 20% to 30% on fascia labor because the roof edge is already exposed during re-roofing. Most roofers can do fascia work as part of the roof project.
- Full exterior trim package (fascia + soffit + gutters): The maximum savings, often 25% to 35% below the cost of doing each project separately
Choosing a Fascia Contractor in Pinellas County
Fascia work falls under the scope of several different contractor specialties in Florida. Roofing contractors, gutter companies, siding installers, and general contractors all perform fascia replacement. Here is how to choose the right one:
- Check licensing: Florida requires contractors to be licensed for the scope of work they perform. Verify through the Florida Department of Business and Professional Regulation.
- Get 3 quotes minimum: Pricing varies widely for fascia work. Make sure each quote specifies the material, includes gutter handling, and addresses what happens if sub-fascia damage is found.
- Ask about moisture barriers: A quality installer will apply a moisture barrier (ice and water shield or similar product) between the sub-fascia and the new fascia board to prevent future moisture migration.
- Warranty terms: Look for a minimum 2-year workmanship warranty on top of the material manufacturer warranty.
- Coordinate with gutter work: If your gutters also need attention, choose a contractor who does both or coordinate the projects so gutters come off once, fascia gets replaced, and new or existing gutters go back up in a single workflow.
Preventing Future Fascia Damage
Once you have invested in new fascia, protecting that investment extends its life and saves money long-term. Here are the most effective prevention strategies for Pinellas County homeowners:
- Keep gutters clean and functional: Overflowing gutters are the number one cause of fascia damage. Clean gutters at least twice a year, more if you have trees near the roofline.
- Maintain paint on wood fascia: Repaint every 3 to 5 years before the existing paint starts to crack or peel. Use a high-quality exterior acrylic latex paint with built-in mildew resistance.
- Ensure proper roof ventilation: Adequate roof ventilation reduces moisture buildup in the attic, which can migrate to the fascia from inside.
- Trim trees: Overhanging branches drop leaves and debris into gutters, shade the fascia (preventing it from drying out after rain), and provide pest access to the roofline.
- Annual inspection: Walk around your home once a year with binoculars and inspect the fascia from the ground. Look for paint issues, discoloration, and any areas where the fascia appears to be pulling away from the house.
Frequently Asked Questions
How much does fascia board replacement cost?
Fascia board replacement costs $8 to $25 per linear foot installed, depending on the material. A typical Pinellas County home requires 150 to 250 linear feet of fascia, putting total project costs between $1,500 and $4,000 for most homeowners. Wood fascia is the most affordable at $8 to $15 per foot, while PVC runs $15 to $25 per foot.
What is the best fascia material for Florida homes?
PVC and composite fascia boards are the best choices for Florida homes. Both materials resist moisture, rot, and insect damage that plague wood fascia in humid climates. Aluminum wrap over existing wood is another popular Florida option that provides weather protection at a moderate price point of $10 to $18 per linear foot.
How do I know if my fascia boards need replacing?
Signs that fascia boards need replacement include peeling or bubbling paint, soft or spongy spots when pressed, visible rot or decay, gutters pulling away from the roofline, animal or insect intrusion near the roofline, and water staining or discoloration. In Florida, check for these signs at least once a year due to the humid climate.
Can I replace fascia boards myself?
Fascia board replacement is possible as a DIY project for handy homeowners, but it requires working at height on a ladder, properly removing gutters, and ensuring waterproof installation. For two-story homes or sections with extensive rot that may extend to the roof deck or rafters, professional installation is strongly recommended.
Should I replace fascia when getting new gutters?
Yes, if your fascia shows signs of damage. New gutters mount directly to the fascia board, so installing them on compromised fascia will lead to gutter failure. Most gutter contractors will inspect fascia during their estimate. Combining fascia and gutter replacement saves money on labor since the gutters must come down anyway.
How long does fascia last in Florida?
Untreated wood fascia in Florida typically lasts 10 to 15 years before showing significant rot. Painted or primed wood fascia lasts 15 to 20 years with regular maintenance. Composite and PVC fascia can last 25 to 50 years. Aluminum-wrapped fascia lasts 20 to 30 years. Florida humidity and rainfall dramatically shorten the life of unprotected wood.
The Bottom Line on Fascia Replacement in Pinellas County
Fascia boards protect the structural edge of your roof, and in Florida's demanding climate, they need to be in solid condition to do their job. Whether you are dealing with active rot, planning a gutter upgrade, or preparing for a full roof replacement, addressing your fascia now prevents more expensive structural damage later.
For Pinellas County homeowners, PVC and composite materials offer the best long-term value despite higher upfront costs. If budget is a priority, aluminum wrapping over sound wood is an excellent middle-ground solution. Whatever material you choose, make sure your installer inspects the sub-fascia underneath and addresses any hidden damage before closing everything up.
Get at least three quotes, ask about moisture barriers and warranty terms, and coordinate with any planned gutter or roofing work to maximize your savings.